Machines and appliances like washing machines are essential in both homes and businesses, quietly handling our daily chores. Yet when they fail, the inconvenience—and unexpected expense—can disrupt your routine or operations significantly. Preventative care is the most effective way to avoid costly downtime and keep your equipment running smoothly. Simple steps can help you avoid major problems and costly repairs down the line. However, if issues persist, it’s wise to promptly contact a reliable professional like an appliance repair Surrey service to handle the issue effectively.
Here’s why proactive maintenance pays off: common appliance parts such as pumps, heating elements, hoses, and bearings naturally wear down over time. Regular checks and simple upkeep tasks—like monthly filter cleaning—can stop minor issues from escalating into expensive breakdowns. If problems persist despite regular maintenance, calling professionals will ensure your appliances stay reliable, keeping your business operations running smoothly.
Table of Contents
5 rules for a long-lasting washing machine
Clean the filter regularly
The filter in your washing machine is the pump’s first line of defence. Coins, buttons, lint—all of it gets trapped there. If you don’t clean it, the pump is overloaded and breaks down, which is why you call for washer repair services.
How to do it: Open the hatch (usually at the bottom of the machine), put the dirt in a bowl, unscrew the filter, and remove it. Do this once a month.
Check the hoses
Water supply and drainage hoses are weak points. Cracks or clogs can lead to leaks that ruin the machine and the floor.
How to do it: Every 3-4 months, inspect the hoses for cracks or bends. Make sure the drain hose is not blocked.
Tip: If you notice a leak, don’t put it off – it could be a signal for a washing machine repair.
Do not overload the machine
Many people think that throwing in more laundry is a time-saver. But overloading wears out the drum, belt, and bearings. Imagine: the machine is humming and squeaking, and then you hear a rumble—this is a cry for help, and you need washer repair services.
How to avoid: Load the drum to 70-80% of the maximum. Leave room for the laundry to move freely. Do not stuff huge blankets into a small machine – this is a direct way to breakage.
Experience: There was a case when a customer overloaded the machine, and the belt broke. We had to repair the washing machine, although prevention would have been cheaper. If you hear a strange noise, contact the appliance repair technicians in Surrey.
Use the right products and fight limescale
Hard water is the enemy of washing machines. The limescale on the heating element causes it to overheat, which is one cause of burnouts. The wrong detergent can clog the hoses or leave limescale. Washing machines aren’t stoves, but caring for them is as important as stove repair when grease clogs the nozzles.
How to do it: Choose detergent for automatic machines labelled “anti-limescale.” Every 2-3 months, run an empty cycle with citric acid (100 g) or a special descaling agent. Do not exceed the dose of powder – this is only harmful.
Tip: If the water is very hard, consider a softener. And if the heating element no longer heats, you need a washing machine repair.
Watch out for installation and electricity
An unevenly installed machine vibrates, which wears out the bearings and drum. Power surges can burn out the control board, and then you can’t do without washer repair services. There was a case when a client put the machine on an uneven floor and, a year later, had to change the bearings – it’s expensive and complicated.
How to do it: Check the machine’s level with a building level. If it is wobbly, tighten the legs or place rubber pads. Install a surge protector to protect against power surges—it’s cheaper than repairing the board.
Tip: Call the appliance repair Surrey technicians. If the machine jumps or doesn’t turn on, don’t drag it out. They will check everything from the wiring to the mechanics.
Why is prevention cheaper than repair?
Repairing a washing machine is not cheap. Replacing a pump can cost $100-200, bearings even more, and a new circuit board can cost half the machine’s price. Prevention, however, requires only your time and a few simple steps. Cleaning the filter costs zero, checking the hoses takes a few minutes, and finding the right powder is just a matter of selecting it at the store. Each action reduces the risk of breakdowns that require a washing machine repair. Compare this to an hour of preventive maintenance once a month versus a day without washing and spending money on technicians for washer repair services. The choice is obvious.
How often should I take care of my machine?
- Every month: Clean the filter and inspect the hoses for leaks.
- Once every 2-3 months: Run the descaling cycle and check the machine’s stability.
- Daily: Do not overload; use the right powder.
Following these rules is like cleaning your stove regularly to avoid stove repair. But if something goes wrong, don’t panic – there are experts to help.
When to call the masters?
Some breakdowns will not do without professional intervention:
The machine does not drain water or is humming – it may be the pump, and you need a washing machine repair.
Rumble or creak during spinning – the bearings are worn out, a job for washer repair services.
If the water doesn’t heat up or the machine doesn’t turn on, the heating element or circuit board has failed, and appliance repair in Surrey is needed.
Repairing complex parts yourself is a risk. For example, replacing bearings without tools can damage the drum, and trying to fix the circuit board can burn out all the electronics. Washing machine repair technicians are experienced and can bring the machine back to life. They will also advise you on how to avoid problems in the future.
Conclusion
A washing machine is not just a piece of equipment but your assistant that deserves attention. Cleaning the filter, checking the hoses, using the right detergents, overload protection, and stable installation—these five rules will help you avoid breakdowns and save money on washer repair services. Prevention is always cheaper and easier than repair, but don’t risk experimenting on your own if the machine has already failed. Contact the masters for appliance repair in Surrey, and your appliances will work like clockwork again.